Two factor authentication for Apache using mod_auth_radius

Introduction

LoginTC makes it easy for administrators to add multi-factor to Apache. This document shows how to configure Apache to require two factor authentication for local and / or remote access via mod_auth_radius Apache RADIUS authentication module. This guide was tested for Apache 2.2. For an alternate method using mod_auth_xradius then you may be interested in: Two factor authentication for Apache using mod_auth_xradius.

Prefer Reading a PDF?

Download a PDF file with configuration instructions:

Prerequisites

Before proceeding, please ensure you have the following:

RADIUS Domain Creation

If you have already created a LoginTC Admin domain for your LoginTC RADIUS Connector, then you may skip this section and proceed to Installation.

  1. Log in to LoginTC Admin
  2. Click Domains:
  3. Click Add Domain: Create Domain
  4. Enter a name and optionally pick an icon Create Domain Form
  5. Scroll down and click Create

Use Default Domain Settings

Domain settings can be modified at any time by navigating to Domains > Your Domain > Settings.

Installation

  1. Download the latest LoginTC RADIUS Connector:
  2. Unzip the file
  3. Import the virtual appliance your computer virtualization software
  4. Ensure that the LoginTC RADIUS Connector has a virtual network card
  5. Start the virtual appliance
  6. You will be presented with a console dashboard: Welcome Screen
  7. The first thing you must do is set the logintc-user password: Set Password Dialogue
  8. By default the appliance network is configured by DHCP. If you wish to manually configure the network, use the Down arrow key to navigate to Network Configuration and DNS Configuration
  9. For access to the web interface select Web Server and then Start: Web Server It may take 30-60 seconds to start the first time: Web Server
  10. Once started, access the web interface by navigating to the URL mentioned in the information box: Web Server

The LoginTC RADIUS Connector runs CentOS 6.8 with SELinux. A firewall runs with the following open ports:

Port Protocol Purpose
22 TCP SSH access
1812 UDP RADIUS authentication
1813 UDP RADIUS accounting
8888 TCP Web interface
443 TCP Web interface
80 TCP Web interface
80 TCP Package updates (outgoing)
123 UDP NTP, Clock synchronization (outgoing)

Note: Username and Password

logintc-user is used for SSH and web access. The default password is logintcradius. You will be asked to change the default password on first boot of the appliance and will not be able to access the web interface unless it is changed.


The logintc-user has sudo privileges.

Configuration

Configuration describes how the appliance will authenticate your RADIUS-speaking device with an optional first factor and LoginTC as a second factor. Each configuration has 4 Sections:

1. LoginTC

This section describes how the appliance itself authenticates against LoginTC Admin with your LoginTC organization and domain. Only users that are part of your organization and added to the domain configured will be able to authenticate.

2. First Factor

This section describes how the appliance will conduct an optional first factor. Either against an existing LDAP, Active Directory or RADIUS server. If no first factor is selected, then only LoginTC will be used for authentication (since there are 4-digit PIN and Passcode options that unlock the tokens to access your domains, LoginTC-only authentication this still provides two-factor authentication).

3. Passthrough

This section describes whether the appliance will perform a LoginTC challenge for an authenticating user. The default is to challenge all users. However with either a static list or Active Directory / LDAP Group you can control whom gets challenged to facilitate seamless testing and rollout.

4. Client and Encryption

This section describes which RADIUS-speaking device will be connecting to the appliance and whether to encrypt API Key, password and secret parameters.

Data Encryption

It is strongly recommended to enable encryption of all sensitive fields for both PCI compliance and as a general best practice.

The web interface makes setting up a configuration simple and straightforward. Each section has a Test feature, which validates each input value and reports all potential errors. Section specific validation simplifies troubleshooting and gets your infrastructure protected correctly faster.

First Configuration

Close the console and navigate to your appliance web interface URL. Use username logintc-user and the password you set upon initial launch of the appliance. You will now configure the LoginTC RADIUS Connector.

Create a new configuration file by clicking + Create your first configuration:

Web Server

LoginTC Settings

Configure which LoginTC organization and domain to use:

Web Server

Configuration values:

Property Explanation
API Key The 64-character organization API key
Domain ID The 40-character domain ID
Request Timeout Number of seconds that the RADIUS connector will wait for

The API key is found on the LoginTC Admin Settings page. The Domain ID is found on your domain settings page.

Click Test to validate the values and then click Next:

Web Server

First Authentication Factor

Configure the first authentication factor to be used in conjunction with LoginTC. You may use Active Directory / LDAP or an existing RADIUS server. You may also opt not to use a first factor, in which case LoginTC will be the only authentication factor.

Web Server

Active Directory / LDAP Option

Select Active Directory if you have an AD Server. For all other LDAP-speaking directory services, such as OpenDJ or OpenLDAP, select LDAP:

Web Server

Configuration values:

Property Explanation Examples
host Host or IP address of the LDAP server ldap.example.com or 192.168.1.42
port (optional) Port if LDAP server uses non-standard (i.e., 389/636) 4000
bind_dn DN of a user with read access to the directory cn=admin,dc=example,dc=com
bind_password The password for the above bind_dn account password
base_dn The top-level DN that you wish to query from dc=example,dc=com
attr_username The attribute containing the user’s username sAMAccountName or uid
attr_name The attribute containing the user’s real name displayName or cn
attr_email The attribute containing the user’s email address mail or email
Group Attribute (optional) Specify an additional user group attribute to be returned the authenticating server. 4000
RADIUS Group Attribute (optional) Name of RADIUS attribute to send back Filter-Id
LDAP Group (optional) The name of the LDAP group to be sent back to the authenticating server. SSLVPN-Users
encryption (optional) Encryption mechanism ssl or startTLS
cacert (optional) CA certificate file (PEM format) /opt/logintc/cacert.pem

Click Test to validate the values and then click Next.

Existing RADIUS Server Option

If you want to use your existing RADIUS server, select RADIUS:

Web Server

Configuration values:

Property Explanation Examples
host Host or IP address of the RADIUS server radius.example.com or 192.168.1.43
port (optional) Port if the RADIUS server uses non-standard (i.e., 1812) 1812
secret The secret shared between the RADIUS server and the LoginTC RADIUS Connector testing123

RADIUS Vendor-Specific Attributes

Common Vendor-Specific Attributes (VSAs) found in the FreeRADIUS dictionary files will be relayed.

Click Test to validate the values and then click Next.

Passthrough

Configure which users will be challenged with LoginTC. This allows you to control how LoginTC will be phased in for your users. This flexibility allows for seamless testing and roll out.

For example, with smaller or proof of concept deployments select the Static List option. Users on the static list will be challenged with LoginTC, while those not on the list will only be challenged with the configured First Authentication Factor. That means you will be able to test LoginTC without affecting existing users accessing your VPN.

For larger deployments you can elect to use the Active Directory or LDAP Group option. Only users part of a particular LDAP or Active Directory Group will be challenged with LoginTC. As your users are migrating to LoginTC your LDAP and Active Directory group policy will ensure that they will be challenged with LoginTC. Users not part of the group will only be challenged with the configured First Authentication Factor.

No Passthrough (default)

Select this option if you wish every user to be challenged with LoginTC.

Web Server

Static List

Select this option if you wish to have a static list of users that will be challenged with LoginTC. Good for small number of users.

Web Server

LoginTC challenge users: a new line separated list of usernames. For example:

  jane.doe
  jane.smith
  john.doe
  john.smith
  

Active Directory / LDAP Group

Select this option if you wish to have only users part of a particular Active Directory or LDAP group to be challenged with LoginTC. Good for medium and large number of users.

Web Server

Configuration values:

Property Explanation Examples
LoginTC challenge auth groups Comma separated list of groups for which users will be challenged with LoginTC SSLVPN-Users or two-factor-users
host Host or IP address of the LDAP server ldap.example.com or 192.168.1.42
port (optional) Port if LDAP server uses non-standard (i.e., 389/636) 4000
bind_dn DN of a user with read access to the directory cn=admin,dc=example,dc=com
bind_password The password for the above bind_dn account password
base_dn The top-level DN that you wish to query from dc=example,dc=com
attr_username The attribute containing the user’s username sAMAccountName or uid
attr_name The attribute containing the user’s real name displayName or cn
attr_email The attribute containing the user’s email address mail or email
encryption (optional) Encryption mechanism ssl or startTLS
cacert (optional) CA certificate file (PEM format) /opt/logintc/cacert.pem

Configuration Simplified

If Active Directory / LDAP Option was selected in First Authentication Factor the non-sensitive values will be pre-populated to avoid retyping and potential typos.

Click Test to validate the values and then click Next.

Client and Encryption

Configure RADIUS client (e.g. your RADIUS-speaking VPN):

Web Server

Client configuration values:

Property Explanation Examples
name A unique identifier of your RADIUS client CorporateVPN
ip The IP address of your RADIUS client (e.g. your RADIUS-speaking VPN) 192.168.1.44
secret The secret shared between the LoginTC RADIUS Connector and its client bigsecret

Data Encryption

It is strongly recommended to enable encryption of all sensitive fields for both PCI compliance and as a general best practice.

Click Test to validate the values and then click Save.

Web Server

Testing

When you are ready to test your configuration, create a LoginTC user (if you haven’t already done so). The username should match your existing user. Provision a token by following the steps:

  1. In a new tab / window Log in to LoginTC Admin
  2. Click Domains
  3. Click on your domain
  4. Click on Members
  5. Click Issue Token button beside your user:
  6. A 10-character alphanumeric activation code will appear beside the user:
  7. Open the LoginTC mobile app.
  8. Enter the 10-character alphanumeric activation code:
  9. Lock the token with a PIN or passcode:

When you have loaded a token for your new user and domain, navigate to your appliance web interface URL:

Web Server

Click Test Configuration:

Web Server

Enter a valid username and password; if there is no password leave it blank. A simulated authentication request will be sent to the mobile or desktop device with the user token loaded. Approve the request to continue:

Web Server

Congratulations! Your appliance can successfully broker first and second factor authentication. The only remaining step is to configure your RADIUS device!

If there was an error during testing, the following will appear:

Web Server

In this case, click See logs and then click the /var/log/logintc/authenticate.log tab to view the log file and troubleshoot:

Web Server

Install mod_auth_radius

The mod_auth_radius module from FreeRADIUS is an Apache RADIUS authentication module. If your system does not have mod_auth_radius installed you will need to do so. Below are instructions for CentOS. For more information on mod_auth_radius and installing it on your system please see: FreeRADIUS mod_auth_radius Apache RADIUS authentication module.

Install mod_auth_radius on CentOS / RedHat

Step 1: Developer tools:


  $ sudo yum install httpd-devel gcc wget openssl openssl-devel -y
  

Step 2: Build mod_auth_radius module:


  $ cd /tmp
  $ sudo wget ftp://ftp.freeradius.org/pub/radius/mod_auth_radius-1.5.8.tar
  $ sudo tar xvf mod_auth_radius-1.5.8.tar
  $ cd mod_auth_radius-1.5.8
  $ sudo apxs -i -a -c mod_auth_radius-2.0.c
  

Note: mod_auth_radius Apache RADIUS authentication module version 1.5.8

At the time of this document being written 1.5.8 was the latest version of the Apache RADIUS authentication module. For updates please see: FreeRADIUS mod_auth_radius Apache RADIUS authentication module.

/etc/httpd/modules/mod_auth_radius-2.0.so is installed and ready to configure

Configure Apache

Step 1: Edit /etc/httpd/conf/httpd.conf (or equivalent path):


  $ sudo vi /etc/httpd/conf/httpd.conf
  

Ensure LoadModule is present:


  LoadModule radius_auth_module /usr/lib64/httpd/modules/mod_auth_radius-2.0.so
  

Inside VirtualHost add:

This example exposes a public URL protected by LoginTC and in turn reverse proxies to a private URL. The private URL can reverse proxy an application manager (i.e. Tomcat) or simply serve the HTML pages directly. Direct access to the private is forbidden since it must come from 127.0.0.1 / localhost.


    # AddRadiusAuth server:port        shared_secret   timeout[:retries]
    # Example server (change to fit your needs):
    AddRadiusAuth   192.168.1.40:1812  bigsecret       60:0
  
    # AddRadiusCookieValid time_in_minutes
    AddRadiusCookieValid 60
  
    <Location "/public">
      AuthType Basic
      AuthName "Radius Authentication"
      AuthBasicProvider "radius"
      AuthRadiusAuthoritative on
      AuthRadiusCookieValid 1
      AuthRadiusActive On
      require valid-user
      ProxyPass http://localhost/private
      ProxyPassReverse http://localhost/private
    </Location>
  
    <Location "/private">
      Order deny,allow
      Deny from all
      ProxyPass http://localhost:8080/mytomcatapp
      ProxyPassReverse http://localhost:8080/mytomcatapp
  
      Allow from 127.0.0.1
      Allow from localhost
    </Location>
  

Step 4: Restart httpd:


  $ sudo service httpd restart
  

You are now ready to test two-factor authentication to Apache.

Testing Apache

Test by accessing the protected URL in your browser. The username of the Apache user must match the username of the user created in your LoginTC organization and added to the domain you have configured to authenticate against.

You will be prompted for basic authentication and then challenged with LoginTC.

User Management

There are several options for managing your users within LoginTC:

Troubleshooting

mod_auth_radius Module

For troubleshooting related to the mod_auth_radius Apache RADIUS authentication module please refer to: FreeRADIUS mod_auth_radius Apache RADIUS authentication module.

Not Authenticating

If you are unable to authenticate, navigate to your appliance web interface URL and click Status:

Web Server

Ensure that all the status checks pass. For additional troubleshooting, click Logs:

Web Server

Also make sure to check the Apache logs and secure logs on the Linux machine hosting Apache (/var/log/secure).

Email Support

For any additional help please email support@cyphercor.com. Expect a speedy reply.

Upgrading

If you have LoginTC RADIUS Connector 1.1.0 or higher, follow these instructions to upgrade your LoginTC RADIUS virtual appliance to the latest version (2.6.2):

  1. SSH into the virtual appliance or open the console (use same username / password as web GUI)
  2. cd /tmp
  3. curl -O https://www.logintc.com/downloads/logintc-radius-connector-2.6.2-upgrade.sh
  4. sudo sh logintc-radius-connector-2.6.2-upgrade.sh

The upgrade script will restart your appliance after upgrading.

Upgrade Script Download Verification

Execute: sha1sum /tmp/logintc-radius-connector-2.6.2-upgrade.sh

Output SHA‑1 should match: 359055aac2a73252cbc79d663310284df402c622